Monolithic Gullies

Milton monolithic road gullies are made on fully automated machines that have an improved system that helps prevent any discharge of oil and can be supplied with adaptors to suit plastic and clay drainage products.

All gullies are manufactured in accordance with BS 5911-6:2004

Gully weights and dimensions

Nominal
I/Dia
(mm)
A
Nominal Wall
Thickness
(mm)
Width
(mm)
B
Effective
Depth
(mm)
C
Capacity
(litres)
Weight
per Unit
(kg)
Outlet I/Dia
(mm)
D
Approximate Measurement (mm)
E
No. per Full
23.5 Tonne Load
                 
375 55 698 750 50 188 150 250 125
375 55 698 900 69 216 150 250 108
450 55 780 750 70 260 150 250 90
450 55 780 900 95 290 150 250 80
450 55 780 1050 120 320 150 250 73

Gully cover slabs

Gully cover slabs are available in both square and 'U' shaped with a 450mm opening and handling recesses for lifting brackets.

Slab Dims Kg's
Square 750 x 650 80
U 585 x 650 50

Gully Adaptors

The gully adaptor is a versatile elastomeric sealing adaptor ring manufactured in EPDM rubber to BS 2494 Type D.

This table shows the tolerant of a range of pipe diameters and profiles - for use only with Milton Precast gullies

For pipes not included in table, the following criteria should be used for selection of correct gully adaptor.

No. 1501 - Spigot diameter - 160mm to 180mm

No. 1502 - Spigot diameter - 175mm to 190mm

To suit pipe Type of pipe Number of gully adaptor required to suit type of pipe
DN 1501 1502
160 uPVC pipe to BS4660 plastic l  
150 aquapipe - corrugated plastic l  
150 ultrarib plastic l  
150 twin wall PVC - corrugated plastic l  
150 supersleeve clay l  
150 densleeve clay   l
150 hepseal clay   l

Tel: (01795) 425191
Fax: (01795) 420360
E-Mail: sales@miltonprecast.com

Milton Pipes Limited, Milton Regis, Sittingbourne, Kent. ME10 2QF